36" Diesel Bucket

  • Brand New

  • 36" Width

  • Includes Pins

  • 50mm (1.96") Pins

  • 11.8" Pin Center To Pin Center

  • 8" Between Ears

  • 5 Teeth

  • Weld On Cutting Wings

  • Weighs 542 Lbs

  • All Measurements Approximated

  • Stock #36-308

$1,850

"Will This Bucket Fit My Machine?"

Buckets can fit a variety of makes and models of machines. To verify that a bucket will fit your machine, two measurements are required. First, your pin diameter, shown as "A" in the illustration above. Some machines have different pin sizes for the front and rear pins, so be sure to measure both. If your pin size is smaller, that is acceptable as bushings can be fabricated to assist in fitting. Second, the dipper or stick width is required. This is the width between the ears of the bucket, shown as "B" in the illustration above. Just like with the pins, if the bucket is a little wider than your dipper, that is acceptable, as spacers can be fabricated to assist in the appropriate fitting.

This Diesel Brand Trackhoe bucket is brand new, 36" wide and has 5 teeth plus weld on cutting wings to slice through your digging! Please measure your machines stick width and pins to see if it will fit.

Delivery Available

Interested in a hauling quote,

please fill out the form below or contact us at (405) 833-6437

Questions

Looking for more information,

please fill out the form below or contact us at (405) 833-6437