Buckets
Will This Bucket Fit My Excavator Or Backhoe?
-
Buckets can fit a variety of makes & models of machines. Also, may machines had a variety of stick options from the factory or dealership, each with different widths & pin sizes.
-
To verify that a bucket will fit your machine, there are two require measurements (A&B). If you have a quick attach system, a third measurements is often required (C).
-
A- You pin diameter. Some machines have different front and rear pin sizes, so be sure to check both. If a pin size is not the correct size, a bushing can be manufactured by a machine shop to help it fit tight.
-
B- The dipper stick width. This is the width of of the stick at the ears pin holes. If the bucket's ear width is too wide for your machine's stick, spacers can be manufactured by a machine shop to make it fit tight.
-
C- The distance between pin centers. This measurement is required when attaching a bucket to a machine with a quick attach system. Most hydraulic quick attach systems allow for several inches of difference between a maximum & minimum pin to pin measurement.
22" EACO Bucket
-
80mm (3.14") Pin Holes
-
13 1/8" Ear Width
-
17" Pin Center To Center
-
3 Teeth
-
Rear Hoop
-
Rear Ripper Attachment Point
-
Stock #36
$2,450
24" Bucket
-
50mm (1.96") Pin Holes
-
7.25" Ear Width
-
?" Pin Center To Center
-
5 Teeth
-
For Backhoe Or MiniExcavator
-
Actual Width 23"
-
Good Condition
-
Stock #13
$750
24" CAT Bucket
-
50mm (1.96") Top Pins
-
Includes Pins
-
8" Ear Width
-
12" Pin Center To Center
-
4 Teeth
-
0.30 Cubic Yard Capacity
-
Stock #43
$1,250
24" Wain Ray Bucket
-
60mm (2.36") Pin Holes
-
14" Ear Width
-
20.5" 1st Pin Hole Center To 2nd
-
24.5" 1st Pin Hole To 3rd
-
Rock & Hard Surface Rippers
-
5 Rippers & 3 Teeth
-
Stock #103
-
Video Coming Soon
$1,250
24" Hensley Bucket
-
80mm (3.14") Pin Holes
-
13 1/8" Ear Width
-
17" Pin Center To Center
-
4 Teeth
-
Rear Ripper Attachment Point
-
Fits Many Excavator Makes
-
Stock #27
$1,550
24" CP Bucket
-
90mm (3.54") Pin Holes
-
13" Ear Width
-
20" Pin Center To Center
-
3 Teeth
-
Rear Hoop
-
Fits Many Excavator Makes
-
Stock #19
$1,750
24" WorkBrau Bucket
-
80mm (3.14") Pins
-
Includes Pins
-
12 1/4" Ear Width
-
18.5" Pin Center To Center
-
4 Teeth & Rear Hoop
-
0.76 Cubic Yard Capacity
-
Stock #14
-
Video Coming Soon
$2,450
24" Eaco Bucket
-
80mm (3.14") Pin Holes
-
12.25" Ear Width
-
18" Pin Center To Center
-
4 Teeth
-
Rear Hoop
-
Stock #28
$2,450
26" JRB Bucket
-
90mm (3.54") Pins
-
13" Ear Width
-
20.5" Pin Center To Center
-
2 Fixed Quick Attach Pins
-
3 Teeth
-
Stock #20
-
Video Coming Soon
$1,450
28" Hensley Bucket
-
90mm (3.54") Pin Holes
-
13.25" Ear Width
-
20.5" Pin Center To Center
-
0.94 Cubic Yard Capacity
-
3 Teeth & Cutting Wings
-
Rear Ripper Attachment Point
-
Stock #32
$2,450
30" Hendrix Bucket
-
50mm (1.96") Pin Holes
-
7 3/16" Ear Width
-
11.5" Pin Center To Center
-
4 Teeth
-
Rear Hoop
-
Stock #1
$1,250
30" EMAQ Bucket
-
60mm (2.36") Pin Holes
-
10" Ear Width
-
14.75" Pin Center To Center
-
0.50 Cubic Yard Capacity
-
4 Teeth
-
Cutting Wings & Rear Hoop
-
Brand New
-
Stock #23
-
Video Coming Soon
$1,950
32" Bucket
-
90mm (3.54") Pin Holes
-
16.5" Ear Width
-
19" Pin Center To Center
-
4 Teeth & Rear Hoop
-
True Width 31"
-
Stock #701
-
Video Coming Soon
$1,950
32" CAT Bucket
-
100mm (3.93") Pin Holes
-
Includes Pins
-
15" Ear Width
-
19.5" Pin Center To Center
-
4 Teeth
-
1.24 Cubic Yard Capacity
-
Weighs 2,655 Lbs
-
Stock #41
$3,250
34" CP Bucket
-
90mm (3.54") Pin Holes
-
Includes Pins
-
12.75" Ear Width
-
19" Pin Center To Center
-
5 Teeth
-
Rear Hoop
-
Stock #806
-
Video Coming Soon
$1,950
36" Bucket
-
45mm (1.77") Front Pin Hole
-
40mm (1.57") Rear Pin Holes
-
3 Sets Of Pin Holes
-
8" Front / 10" Rear Ear Width
-
14" Top Pin To Middle Pin
-
16" Top Pin To Rear Pin
-
6 Teeth & Rear Hook
-
Stock #256
-
Video Coming Soon
$950
36" Bucket
-
65mm (2.55") Pin Holes
-
10" Ear Width
-
14" Pin Center To Center
-
5 Teeth
-
Cutting Wings
-
Stock #4
$1,250
36" Diesel Bucket
-
50mm (1.96") Pin Holes
-
8" Ear Width
-
11.8" Pin Center To Center
-
Includes Pins
-
5 Teeth & Cutting Wings
-
Weighs 542 Lbs
-
Brand New
-
Stock #36-308
-
Video Coming Soon
$1,850
36" CF Bucket
-
90mm (3.54") Pin Holes
-
16 3/16" Ear Width
-
19" Pin Center To Center
-
Includes One Pin
-
5 Teeth
-
1.48 Cubic Yard Capacity
-
Stock #2
$2,475
40" Bucket
-
90mm (3.54") Top Pin Hole
-
80mm (3.14") Bottom Pin Hole
-
15 1/8" Ear Width
-
20" Pin Center To Center
-
4 Teeth W/ Rear Hoop
-
Brand New
-
Stock #728
-
Video Coming Soon
$3,450
42" Diesel Bucket
-
45mm (1.77") Pin Holes
-
Includes Pins
-
6.69" Ear Width
-
10.23" Pin Center To Center
-
Brand New
-
Weighs 430 Lbs
-
Stock #113
$1,250
44" CAT Bucket
-
100mm (3.93") Pin Holes
-
17.5" Ear Width
-
19.5" Pin Center To Center
-
5 Teeth
-
Rear Hoop
-
Stock #40
-
Fits Many Excavator Makes
$2,950
48" Teran Bucket
-
65mm (2.55") Pin Holes
-
8.75" Ear Width
-
16" Pin Center To Center
-
Brand New
-
Great For Cleaning Ponds
-
Stock #1104
-
Fits Many Excavator Makes
-
Video Coming Soon
$1,750
50" Bucket
-
55mm (2.16") Pin Holes
-
6 3/8" Ear Width
-
10" Pin Center To Center
-
Great For Cleaning Ponds
-
Stock #811
-
Fits Many Excavator Makes
-
Video Coming Soon
$1,250
58" Hensley Bucket
-
55mm (2.16") Pin Holes
-
9.5" Ear Width
-
15" Pin Center To Center
-
Great For Cleaning Ponds
-
Stock #810
-
Fits Many Excavator Makes
-
Video Coming Soon
$1,250
60" C&P Bucket
-
65mm (2.55") Pin Holes
-
10 1/8" Ear Width
-
15" Pin Center To Center
-
Great For Cleaning Ponds
-
Stock #809
-
Fits Many Excavator Makes
$1,250
24" Bucket
-
45mm (1.77") Pin Holes
-
6.75" Ear Width
-
?" Pin Center To Center
-
5 Teeth
-
For Backhoe Or MiniExcavator
-
Actual Width 23"
-
Good Condition
-
Stock #12
$750
24" Bucket
-
65mm (2.56") Top Pin Holes
-
60mm (2.36") Bottom Pin Holes
-
8 1/8" Ear Width
-
?" Pin Center To Center
-
5 Teeth
-
For Backhoe Or MiniExcavator
-
3 Sets Of Pin Holes
-
Stock #16
-
Video Coming Soon
$750
24" Adco Rock Bucket
-
50mm (1.96") Pin Holes
-
10" Ear Width
-
23.5" Pin Center To Center
-
7 Teeth
-
Rock & Hard Surface V Design
-
Fits Many Excavator Makes
-
Stock #102
-
Video Coming Soon
$1,250
24" Hensley Bucket
-
90mm (3.54") Pin Holes
-
13.75" Ear Width
-
20" Pin Center To Center
-
3 Teeth
-
Weld On Cutting Edge
-
Rear Hoop
-
0.90 Cubic Yard Capacity
-
Stock #119
-
Video Coming Soon
$1,500
24" CP Bucket
-
80mm (3.14") Pin Holes
-
12 1/8" Ear Width
-
17.5" Pin Center To Center
-
3 Teeth & Rear Hoop
-
0.787 Cubic Yard Capacity
-
Fits Many Excavator Makes
-
Stock #802
-
Video Coming Soon
$1,750
24" Eaco Bucket
-
80mm (3.14") Pin Holes
-
12 1/8" Ear Width
-
18.5" Pin Center To Center
-
4 Teeth
-
Rear Hoop
-
Fits Many Excavator Makes
-
Stock #17
$1,750
24" Eaco Bucket
-
80mm (3.14") Pin Holes
-
13" Ear Width
-
17" Pin Center To Center
-
3 Teeth & Rear Hoop
-
Rear Ripper Attachment Point
-
Stock #35
$2,450
24" CP Bucket
-
80mm (3.14") Pin Holes
-
14" Ear Width
-
19" Pin Center To Center
-
3 Teeth & Cutting Wings
-
Rear Ripper Attachment Point
-
Stock #38
$2,750
28" Bucket
-
70mm (2.75") Pin Holes
-
12 2/3" Ear Width
-
18" Pin Center To Center
-
0.94 Cubic Yard Capacity
-
3 Teeth
-
Rear Hook
-
Stock #21
-
Video Coming Soon
$2,250
30" Eaco Bucket
-
75mm (2.95") Front Pin Holes
-
70 MM (2.75") Rear Pin Holes
-
8.25" Front Ear Width
-
7.5" Rear Ear Width
-
12" Pin Center To Center
-
0.45 Cubic Yard Capacity
-
5 Teeth
-
Stock #803
$950
30" Eaco Bucket
-
75mm (2.95") Front Pin Hole
-
70mm (2.75") Rear Pin Hole
-
10 5/8" Ear Width
-
16" Pin Center To Center
-
4 Teeth
-
Rear Hoop / Hook
-
Stock #801
-
Video Coming Soon
$1,250
30" Hensley Bucket
-
65mm (2.55") Pin Holes
-
Includes Pins
-
10" Ear Width
-
16.5" Pin Center To Center
-
0.67 Cubic Yard Capacity
-
4 Teeth & Cutting Edge
-
Stock #15
-
Video Coming Soon
$2,250
32" Hensley Bucket
-
90mm (3.54") Pin Holes
-
15.5" Ear Width
-
21" Pin Center To Center
-
4 Teeth & Cutting Wings
-
Rear Ripper Attachment Point
-
Stock #30
$2,950
34" Tooth Pro Bucket
-
90mm (3.54") Pin Holes
-
14.5" Ear Width
-
19" Pin Center To Center
-
4 Teeth
-
Cutting Wings
-
Stock #702
-
Video Coming Soon
$1,500
36" WB Bucket
-
50mm (1.97") Pin Holes
-
Includes Pins
-
8" Ear Width
-
11.25" Pin Center To Center
-
Fits Many Backhoe & Excavators
-
Stock #25
$750
_JPG.jpg)
36" ADCO Bucket
-
75mm (2.95") Pin Holes
-
Includes Pins
-
3 Sets Of Pin Holes
-
11.25" Ear Width
-
9 Teeth
-
Model 21V36
-
Rock & Hard Surface V Shape
-
Stock #1019
-
Video Coming Soon
$1,250
36" Woods Bucket
-
45mm (1.77") Pin Holes
-
6.75" Ear Width
-
3 Pin Holes
-
15"/18" Pin Center To Center
-
7 Teeth
-
Stock #703
$1,250
36" Hensley Bucket
-
90mm (3.54") Pin Holes
-
13.75" Ear Width
-
20" Pin Center To Center
-
4 Teeth W/ Weld On Cutting Edge
-
Weighs 542 Lbs
-
1.5 Cubic Yard Capacity
-
Stock #805
-
Video Coming Soon
$2,100
40" Eaco Bucket
-
90mm (3.54") Pin Holes
-
15.5" Ear Width
-
21" Pin Center To Center
-
5 Teeth W/ Cutting Wings
-
Rear Hoop
-
1 3/8 Cubic Yard Capacity
-
Stock #106
-
Video Coming Soon
$2,000
40" Bucket
-
100mm (3.93") Top Pin Hole
-
90mm (3.54") Bottom Pin Hole
-
15 3/16" Ear Width
-
20" Pin Center To Center
-
4 Teeth W/ Rear Hoop
-
Brand New
-
Stock #729
-
Video Coming Soon
$3,450
42" Teran Bucket
-
90mm (3.54") Pin Holes
-
16.25" Ear Width
-
18.5" Pin Center To Center
-
Lip Protectors & Heal Shrouds
-
Side Cutters & Protectors
-
Rear Hoop / 1.19 CY Cap
-
Brand New
-
Stock #727
-
Video Coming Soon
$4,450
48" CP Bucket
-
50mm (1.96") Pin Holes
-
7.75" Ear Width
-
12" Pin Center To Center
-
Rear Hoop
-
Stock #808
-
Fits Many Excavator Makes
-
Video Coming Soon
$950
48" CF Bucket
-
60mm (2.36") Pin Holes
-
14.5" Ear Width
-
20.5" Pin Center To Mid Center
-
25.5" Pin Center To Rear Center
-
6 Teeth
-
Stock #18
-
Fits Many Excavator Makes
-
Video Coming Soon
$2,850
54" Bucket
-
60mm (2.36") Pin Holes
-
10 5/8" Front Ear Width
-
10 1/4" Rear Ear Width
-
15" Pin Center To Center
-
Great For Cleaning Ponds
-
Stock #112
-
Fits Many Excavator Makes
-
Video Coming Soon
$1,250
60" Eaco Bucket
-
60mm (2.36") Pin Holes
-
10.25" Ear Width
-
14.5" Pin Center To Center
-
Great For Cleaning Ponds
-
Stock #115
-
Fits Many Excavator Makes
-
Video Coming Soon
$1,250
60" Teran Bucket
-
65mm (2.55") Pin Holes
-
8.75" Ear Width
-
16" Pin Center To Center
-
0.50 Cubic Yard Capacity
-
632 Lbs
-
Brand New
-
Stock #1101
-
Fits Many Excavator Makes
-
Video Coming Soon
$2,750
Delivery Available
Interested in a hauling quote or have a question?
Contact us at (405) 833-6437 or Info@i35equipment.com
(Please Include Your Full Address & Reference Stock #)
Buckets
Having the right bucket can make getting your job done much easier and more efficient. While a standard digging bucket for your backhoe or excavator is well rounded for most jobs other buckets have special designs or shapes for an intended purpose. Buckets with a V-shape are built to help cut through hard, rocky soils. Some buckets also have a ripper mounted on them for when a hard patch is encountered during digging. Skeleton buckets are built in a grid pattern to allow small debris and rocks to fall away, while scooping desired rocks and items out. A wide, shallow bucket is great for sand and cleaning out mud from ponds. The shape of the teeth on buckets could be for generic digging or for specific soil types. Also some bucket have cutting wings to help protect the bucket while slicing through soils. I35 Equipment offers new and used consignment buckets in many sizes, so no matter your needs, you can be sure you will have the right one needed to keep get the job done.
No matter your needs, we welcome you to share your goals with us so that we can best assist you in finding the bucket that will help you accomplish them most efficiently and effectively.
